HVAC Equipment for Tribeca
Loft conversions, landmarked facades, and nowhere to put a sleeve
Tribeca is the neighborhood where the usual answer does not apply. These are converted industrial buildings with landmarked facades, and the through-the-wall sleeve that solves the problem everywhere else in the city frequently is not there and cannot be added.
How we work: we supply the equipment and handle delivery. We do not install, and we do not send crews. Your contractor does the install, and we will brief them on the fit before anything ships. What we bring is sourcing, including sizes no manufacturer builds for anymore.
Converted industrial, not residential stock
Most Tribeca residential space started as something else: warehouses, printing houses, textile lofts. The conversions came later, which means the mechanical systems were retrofitted into buildings that were never designed for them. There is no original sleeve grid the way there is in a post-war Bronx building.
The building envelope itself is the constraint. Cast-iron and masonry facades across four designated historic districts mean new exterior penetrations are heavily restricted. Large windows and high ceilings make the spaces beautiful and hard to condition, and the open floorplates that make lofts appealing also mean there are few walls to hide equipment or runs in.
Cooling loads also run higher than the square footage suggests, because of the glass.
The problem we get called about
Where does the equipment go. If there is no existing sleeve and you cannot cut the facade, through-wall is off the table and the conversation moves to systems that reject heat somewhere else: a roof or rear-yard condenser with line sets run through the building, or a ductless multi-zone setup.
Where a previous conversion did put sleeves in, they are often non-standard sizes chosen by whoever did the conversion in the 1980s or 1990s. Those are exactly the openings with no catalog replacement, and exactly the case custom fabrication exists for.
What we supply for Tribeca
High-velocity systems
Small-duct runs work in lofts where there is limited chase space and no appetite for dropped ceilings.
Multi-zone ductless
For open floorplates where one outdoor unit can serve several zones.
Custom-size thru-wall
When a conversion-era sleeve is a size nobody makes anymore, custom fabrication is the practical answer.
If your building runs Aerosys or AboveAir
Both manufacturers have left the through-the-wall market, and the 36" x 19" opening they served has no catalog replacement from anyone. We have ours custom built in R-454B. Find your model in the Aerosys cross-reference or the AboveAir cross-reference.
Tribeca Questions
Other areas we supply
We are based in New York City and ship anywhere in the United States by freight. Browse the full product range or the R-410A catalog of existing stock.
Send us the model and the opening
Nameplate model number, the measured wall opening, and the address. That is enough for us to tell you what fits, what it costs, and how fast we can get it to you.
Or send us the details and we will get back to you.