Jaga Briza-12 built-in, (15.0in) high, (28.3in) long, 2 pipe, complete with JDPC fan controller - BZBW.038072/2

The Jaga Briza-12 (BZBW.038072/2) is the longer, higher-output version of Jaga's slim hydronic fan coil, built to recess into a wall or sit under a window and handle both heating and cooling. At 15 inches high, 28.3 inches long, and 4.6 inches deep, the extra length over the 20.5 inch model gives it more capacity for larger rooms while keeping the same shallow, wall-friendly profile. Hot water heats the space in winter, chilled water cools and dehumidifies in summer, and a quiet low-voltage EC fan handles the air movement.

Like the rest of the Briza line, this unit makes real heat on low-temperature water, which is what an air-to-water heat pump puts out. That is why it fits so well in NYC buildings electrifying under Local Law 97, where the aim is getting heat off gas and onto heat pumps. Our NYC commercial heat pump guide walks through how equipment like this fits a retrofit, and the DOAS guide covers pairing fan coils with dedicated ventilation.

This is the 2-pipe configuration: one supply line, one return line, and a seasonal changeover between heating and cooling for the whole system. It is the straightforward, cost-effective setup for a building running a single heat-pump or boiler-and-chiller loop. The JDPC fan controller ships factory-wired and pre-set, and it only runs the fan once the water is at the right temperature, so you avoid the cold-air blast at heating startup and keep the room quiet.

NYC note: this is the size to reach for when the 20.5 inch Briza would come up short. It carries larger living rooms and open spaces while still sitting only 4.6 inches deep, which keeps it practical for prewar walls. Jaga stock comes in batches, so call us at (385) 319-1559 for current availability, lead time, and sizing help.