(385) 319-1559
AEROSYS TTWC-R30P21 - 2.5 Ton - Condenser 36H x 19W
Aerosys

AEROSYS TTWC-R30P21 - 2.5 Ton - Condenser 36H x 19W

$9,923

As low as $827/mo with Affirm or Klarna

At 2.5 tons and 30,000 BTU, the Aerosys TTWC-R30P21 is the largest standard-line through-wall condenser in the Aerosys catalog -- and it's the unit you reach for when you've got a big space to cool through a standard NYC wall sleeve. We're talking large one-bedrooms and two-bedrooms with open layouts between 1,000 and 1,400 square feet, corner apartments with extra window exposure, or situations where one condenser needs to feed multiple air handlers in a zoned setup.

This is the standard version of the 2.5-ton TTWC. The LX Series variant (R30P21LX) is also available with commercial-grade internal components, and at this tonnage, the choice between standard and LX is worth thinking through carefully. A 2.5-ton compressor works harder than a smaller unit by definition -- more refrigerant flow, more heat rejection, more mechanical stress on the contactors and fan motor. If this condenser is going into a high-use application (think: a large apartment with lots of glass that runs AC from April to November), the LX's heavier-duty components will pay for themselves in longer service intervals. For more typical seasonal use, the standard R30P21 is a reliable machine at a better price point.

The TTWC-R30P21 fits the same 36\" W x 19\" H wall sleeve as the 1.5 and 2.0-ton Aerosys models. That's by design -- Aerosys built the entire TTWC line around the standard NYC sleeve dimension so you can size the system to the space without touching the building envelope. No sleeve modifications, no structural concerns, no co-op board approval headaches beyond the normal alteration agreement. It's a split system condenser, so you will need a matched indoor air handler. Check our PTAC vs. through-wall guide if you want to understand why the split approach beats a packaged unit, especially at higher tonnages where noise and efficiency gaps widen.

Electrical: 208-230V/60Hz/1Ph, R-410A refrigerant. Fits standard NYC wall sleeves. Made in the USA. Before committing to 2.5 tons, make sure you actually need it -- oversizing causes short-cycling, poor humidity control, and higher energy bills. Our through-wall sizing guide will help you confirm the right capacity for your specific apartment.

Download Spec Sheet (PDF)

Specifications

SpecificationValue
ModelTTWC-R30P21
Capacity2.5 Ton
BTU30,000
Voltage208-230V/60Hz/1Ph
RefrigerantR-410A
Dimensions36" H x 19" W
TypeThru-Wall Condensing Unit
ConfigurationSplit System

Frequently Asked Questions